The simplest and quickest way to get servos up and running on your layout. Features an integrated controller/programmer/DCC decoder/power supply and servo driver in a tiny 1.25" x 1.25" board. Comes with a servo and a servo extension cord - simply plug in the servo and connect the unit to your DCC power bus and the wiring is finished. The Controller mounts behind your fascia through holes drilled using the drilling template. The controller doubles as a programmer letting you precisely set the turnout endpoints and to set the DCC address. The unit can be used without the DCC option on DC layouts by using an AC or DC power supply or you can also use it with DCC alone if you wish.
It also possible to use servos to animate semaphores, crossing gates and other items on your layout.
Use to control four turnouts using R/C style servos. Servos are easily mounted under the turnout and provide a reliable and inexpensive method to switch points. You can move the points by DCC commands from your throttle, or use buttons on the fascia. LEDs can be hooked up to indicate the direction of throw. It also possible to use servos to animate semaphores, crossing gates, wigwags and other items on your layout.